Parker SSD 591P 180A 2Q 220V to 500V 3ph AC to DC Converter 230V Aux

Parker SSD 591P 180A 2Q 220V to 500V 3ph AC to DC Converter 230V Aux - 591P-53318032-P00-U4A0 (591P/0180/500/0011/UK/AN/0/230/0) ！

Parker SSD 590P Series 180A Single or Two Quadrant DC Thyristor Drive for 400V Supply with 230V Control supply. Converts a three phase AC supply to DC for speed and torque control of a DC motor.
Typical Motor output , up to 75kW (100HP) at 460V DC.

Simple to set-up in Digital, fully-isolated Single or Two Quadrant form and ready to run from its 'Quick Set-Up' settings.
Dimensions: Frame Size 3, 250mm Wide x 234mm Deep x 485mm High.
Weight: 20kg (packed weight is 22kg)

Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Tacho input (or internal AVF) Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.

Input Current: 148A for Armature + up to 10A for Field.
Input Voltage: 380V/415V/440V/460V three phase +-10% at 50/60Hz via 200A High Speed back-up fuses.

Ambient Temperature: Rated at 40C.
Ventilation space above: 150mm,
Ventilation space below: 100mm,
Ventilation space at sides: 0mm.
Heat Loss: 570W at maximum output.

Mounting: Panel mount with M6 screw fixings on 400 x 200mm centres.

Part Number: 591P-53318032-P00-U4A0, Was: 591P-0180-500-0011-UK-AN-0-230-0, Exactly the same as Eurotherm Drives 591P-0180-500-0011-UK-AN-0-0-0.

Tarriff code: 85371091

Replaces:- SSD and Eurotherm Drives 591A-0180, 546-0180 analogue products. Used on many Extruder and general applications.

Requires external back-up high speed fuses at 200A and supply via minimum 50uH choke.

Parker 590+ Series DC Drives Model: