Parker SSD 591P 500A 2Q 220V/500V 3ph AC to DC Converter 115V Aux

Parker SSD 591P 500A 2Q 220V/500V 3ph AC to DC Converter 115V Aux - 591P-53350041-P00-U4A0 (591P/0500/500/0011/UK/AN/0/115/0) ！

Parker SSD Drives 590P Series 500A Single or Two Quadrant DC Thyristor Drive for 400V Supply with 115V Control supply.
Typical Motor output:  up to 210kW (275HP) at 460V DC for DC motor speed and torque control.

Size: 253mm Wide x 358mm Deep x 700mm High.

Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Tacho input (or internal AVF) Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.

Input Current:  410A for Armature + up to 30A for Field.
Input Voltage:  380V/415V/440V/460V three phase +-10% at 50/60Hz.
Control supply:  115V single phase for; electronics, pilot for main contactor and 130W cooling fan.

Rated at 40C Ambient.
Ventilation space above:  200mm.
Ventilation space below:  210mm.
Ventilation space at sides:  0mm.
Heat Loss at max output:  1590W.

Panel mount with M8 screw fixings on 680 x 150mm centres.

Supplied as the 591P and a separate plug-on tacho-generator feedback board.  The 591P is factory set for Armature Voltage Speed Feeback.  Change the feedback options to 'Tacho' from the set-up menu. 

Manufacturers part number:  591P-53350041-P00-U4A0. Was 591P-0500-500-0011-UK-AN-0-115-0, Exactly the same as Eurotherm Drives 591P-0500-500-0011-UK-AN-0-115-0. Use this to replace the 595-4500.

Parker 590+ Series DC Drives Model: