Parker SSD 590P 725A 4Q 500V to 600V 3ph AC to DC Converter 115V Aux

Parker SSD 590P 725A 4Q 500V to 600V 3ph AC to DC Converter 115V Aux - 590P-63372541-P00-U4V0 (590P/0725/600/0011/UK/ARM/0/115/0) ！

Parker SSD Drives 590P Series - 725A Four Quadrant DC Thyristor Drive for 500V to 600V Supply with 115V Control supply.
Typical Motor output - up to 400kW (536HP) at 620V DC for fully regenerative DC motor speed and torque control.

Simple to set-up in Digital, fully-isolated Four Quadrant form.
253mm Wide x 358mm Deep x 700mm High.

Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Internal AVF Feedback for actual speed measurement.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.

Input Current - 595A for Armature + up to 30A for Field.
Input Voltage - 500V/600V three phase +-10% at 50/60Hz.
Control supply at 230V single phase is required for; electronics, pilot for main contactor and 140W cooling fan.

Rated at 40C Ambient.
Ventilation space above - 200mm.
Ventilation space below - 210mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - 2265W.

Panel mount with M8 screw fixings on 680 x 150mm centres.

Full part number is 590P-63372541-P00-U4V0. Was 590P-0725-600-0011-UK-ARM-0-1150-0, Exactly the same as Eurotherm Drives 590P-0725-600-0011-UK-ARM-0-115-0.