DC Motor Speed Controller - DC590+ Series 590P-53311020-P00-U4V0

DC Motor Speed Controller - DC590+ Series 590P-53311020-P00-U4V0 .Parker SSD Drives 590P Series - 110A Four Quadrant DC Thyristor Drive for 400V Supply with 110V or 230V Control supply.
Typical Motor output - up to 45kW (60HP) at 460V DC for fully regenerative static reversing DC motor speed and torque control.

Keypad and analogue Tacho-generator feedback board are included.
Simple to set-up in Digital, fully-isolated Four Quadrant form.
Size 2 - 200mm Wide x 292mm Deep x 434mm High.

Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Internal AVF only:(Please select encoder or tacho feedback cards below if required)
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.

Field supply - 10A x up to 90% of AC supply value (Current or Voltage controlled)
Input Current - 91A for Armature + up to 10A for Field.
Input Voltage - 380V/415V/440V/460V three phase +-10% at 50/60Hz.
Input fuse - 160A or lower to suit input bridge at 15,000A²s
Use a choke in the supply at 50uH minimum.

Rated at 40C Ambient.
Ventilation space above - 161mm.
Ventilation space below - 100mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - 354W.
Panel mount with M6 screw fixings on 418 x 140mm centres.

Full part number is - 590P-53311020-P00-U4V0. Was - 590P-0110-500-0011-UK-ARM-0-0-0, Exactly the same as Eurotherm Drives 590P-0110-500-0011-UK-ARM-0-0-0.  Use this product for code 590P-53311020-P00-U4V0 and change the feedback option to 'AVF' for Armature Voltage Feedback as speed measurement

Replaces:-
SSD and Eurotherm Drives 590C-0110 digital, 590A-0110 and 545-1100 analogue products. Requires external back-up high speed fuses.

Parker 590+ Series DC Drives Model: