DC Motor Speed Controller - DC590+ Series 590P-53372541-P00-U4A0

DC Motor Speed Controller - DC590+ Series 590P-53372541-P00-U4A0 (590P/0725/500/0011/UK/AN/0/115/0) -Parker SSD 590P 725A 4Q 220V to 500V 3ph AC to DC Converter 115V Aux!

Parker SSD Drives 590P Series - 725A Four Quadrant DC Thyristor Drive for 400V Supply with 110V Control supply.
Typical Motor output - up to 300kW (400HP) at 460V DC for fully regenerative DC motor speed and torque control.

Simple to set-up in Digital, fully-isolated Four Quadrant form.
253mm Wide x 358mm Deep x 700mm High.

Terminals include:-
5 x Analogue Inputs (4 x Configurable).
3 x Analogue Outputs (2 x Configurable).
Tacho input (or internal AVF) Feedback.
10 x Digital inputs - 5 are Configurable including two as encoder inputs for a second or line encoder.
3 x Digital Outputs (all Configurable).
+ & - 10V for Potentiometers.

Input Current - 595A for Armature + up to 30A for Field via 900A High Speed line fuse.
Input Voltage - 380V/415V/440V/460V three phase +-10% at 50/60Hz.
Control supply at 110V single phase is required for; electronics, pilot for main contactor and 130W cooling fan.

Rated at 40C Ambient.
Ventilation space above - 200mm.
Ventilation space below - 210mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - 2265W.

Panel mount with M8 screw fixings on 680 x 150mm centres.

Full part number is 590P-53372541-P00-U4A0. Was 590P-0725-500-0011-UK-AN-0-115-0, Exactly the same as Eurotherm Drives 590P-0725-500-0011-UK-AN-0-115-0.

Replaces:- SSD and Eurotherm Drives 590C-0720 digital, 590A-0720 and 550-720 analogue products. Requires external back-up high speed fuses.

Parker 590+ Series DC Drives Model: